Dip 5 mm Round Purple UV LED Diode Water Clear for collect or kill mosquito
Product Details:
Place of Origin: China (mainland)
Brand Name: DOUBLE LIGHT
Certification: ISO9001:2008/ROHS
Model Number: DL-504UVCA-UV380
Payment & Shipping Terms:
Minimum Order Quantity: 10,000pcs
Delivery Time: 15 working days after received your payment
Payment Terms: L/C, T/T, Western Union,paypal
Supply Ability: 15,000,000pcs per Day
- Product Description
- parameter
-
Product Name: Purple LED Package: Dip 5 Mm Emitted Color: Purple / UV Peak Emission Wavelength: 265nm 280nm 365nm 375nm 380nm 395nm 400nm 410nm Chip Material: InGaN Lens Type: Water Clear Forward Voltage @20ma: 3.0-3.3v Luminous Intensity: 200mcd Viewing Angle: 30 Deg Highlight: 365nm uv led , uv led chip DL-504UVCA-UV380.pdf
Dip 5 mm Round Purple UV LED Diode / High power uv led light Water Clear 365nm 375nm 380nm 395nm 400nm 410nmFeatures:
- Popular T-1 3/4 diameter package.
- No IR emission. Ideal for heat sensitive materials.
- Instant on and instant off.
- Long life.
- Sharp spectrum.
- Compact light (free design).
- Power is adjustable by current (No Shutters Needed).
- Ability to operate in low temperature.
- Impact resistance.
- The product itself will remain within RoHS compliant Version.
Applications:
- Photo catalyst excitation.
- Phosphor excitation.
- Sensor.
- QA equipment.
- Counterfeit Bill Detection.
Package Dimension:
Part No. Chip Material Lens Color Source Color DL-504UVCA-UV380 InGaN Water Clear Purple
Absolute Maximum Ratings at Ta=25℃Parameters Symbol Max. Unit Power Dissipation PD 100 mW Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
IFP 100 mA Forward Current IF 25 mA Reverse Voltage VR 5 V Operating Temperature Range Topr -40℃ to +85℃ Storage Temperature Range Tstg -40℃ to +100℃ Lead Soldering Temperature
[4mm (.157″) From Body]Tsld 260℃ for 5 Seconds
Electrical Optical Characteristics at Ta=25℃Parameters Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity * IV 100 200 --- mcd IF=20mA (Note 1) Viewing Angle * 2θ1/2 --- 30 --- Deg IF=20mA (Note 2) Peak Emission Wavelength λp --- 380 --- nm IF=20mA Spectrum Radiation Bandwidth Δλ --- 15 --- nm IF=20mA Forward Voltage VF 3.00 3.30 --- V IF=20mA Reverse Current IR --- --- 10 µA IF=20mA
Notes:- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- Please read the following notes before using the product:
- Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).
- Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
- Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
- Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
- Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
- Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices equipment and machinery must be properly grounded.
Company introduction:
HongKong Double Light Electronics was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines, which include UV LED, THT LEDs, chip LEDs, LED displays, 5mm lamp LED, infrared LEDs, dot matrix, LCD backlights and LED lighting fixtures. -
Product Details:
Place of Origin: China (mainland)
Brand Name: DOUBLE LIGHT
Certification: ISO9001:2008/ROHS
Model Number: DL-504UVCA-UV380
Payment & Shipping Terms:
Minimum Order Quantity: 10,000pcs
Delivery Time: 15 working days after received your payment
Payment Terms: L/C, T/T, Western Union,paypal
Supply Ability: 15,000,000pcs per Day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
