DL-PCB3535RGBC SMD Chip LED , 3W High Power 3535 RGB Full Color LED, Red, Green,Blue tri-color
Product Details:
Place of Origin: China
Brand Name: Doule Light
Certification: RoHS/ REACH
Model Number: DL-PCB3535RGBC
Payment & Shipping Terms:
Minimum Order Quantity: 1000pcs/Reel
Price: US$0.30-0.50 Per piece or Price Negotiable
Delivery Time: 10-12 woriking days after payment received
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
- Product Description
- parameter
-
Product Name:
3W High Power 3535 RGB Full Color LED
Package:
High Power LED With Lens
Emitted Color:
RGB Full Color
Product Number:
DL-PCB3535RGBC
Dominant Wavelength:
Red:620-630nm, Pure Green:525-530nm, Blue:460-470nm
Forward Voltage:
Red:2.0-3.0V, Pure Green:2.8-4.0V, Blue:2.8-4.0V
Forward Current:
350mA For Three Colors
Luminous Flux:
Red:40-50Lm, Pure Green:60-80LM, Blue:15-25LM
Viewing Angle:
120Deg
Datasheet:
Update
Highlight:
led smd rgb, brightest smd led
3W High Power 3535 Full Color LED
This is our 3W High Power 3535 RGB Full Color LED.
Features:
- Very long operating life (up to100k hours).
- Three chips (color) in one package.
- Independent control of each color.
- More energy efficient than incandescent and most halogen lamps.
- Low voltage operated.
- Instant light.
- Long operating life.
- IR reflow process compatible.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- DL-PCB3535RGBC is one of the highest flux LEDs in the world. It is designed to satisfy applications of Solid-State lighting. It is designed to have three chips in one package. It has various colors for choice and can be independently controlled. More important, it can be pass reflow process.
Applications:
- Up-lighters and Down-lighters.
- Contour lights.
- Ceiling lights.
- Garden lighting.
- Architectural lighting.
- Beacon lights.
Mechanical Dimensions:
Part No.
Chip Material
Source Color
DL-PCB3535RGBC
R
AlGaInP
Ultra Red
G
InGaN
Pure Green
B
InGaN
Blue
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.10mm (.004") unless otherwise specified.Absolute Maximum Ratings at Ta=25℃
Parameters Symbol Rating Units Forward Current IF 350 mA Peak Pulse Current
(tp≤100μs, Duty cycle=0.25)
I pulse 1000 mA Reverse Voltage VR 5 V LED Junction Temperature Tj 135 ℃ Operating Temperature Range Topr -40 to +80 ℃ Storage Temperature Range Tstg -40 to +100 ℃ Soldering Time at 260 ℃ (Max.) Tsol 5 Seconds Notes:
1. Proper current derating must be observed to maintain junction temperature below the maximum.
2. LEDs are not designed to be driven in reserve bias.
Electrical Optical Characteristics at Ta=25℃
Parameters Symbol Emitting Color Min. Typ. Max. Unit Test Condition Viewing Angle 2θ1/2 Full color --- 120 --- Deg IF=350mA Forward Voltage VF Red 2.0 2.2 3.0 V IF=350mA Green 2.8 3.2 4.0 Blue 2.8 3.5 4.0 Peak Emission Wavelength λp Red --- 625 --- nm Measurement
@Peak
Green --- 520 --- Blue --- 465 --- Dominant Wavelength λd Red 620 626 630 nm Green 525 528 530 Blue 460 464 470 Spectral Line Half-Width △λ Red --- 18 --- nm IF=350mA Green --- 36 --- Blue --- 20 --- Luminous Flux Фv Red 40 45 --- lm IF=350mA Green 60 70 --- Blue 15 20 --- Notes:
1. Luminous Flux Measurement allowance is ± 10%.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Typical Electrical / Optical Characteristics Curves
Precautions For Use:
1. Over-current-proof
Though HP60M has conducted ESD protection mechanism, customer must not use the device in reverse and should apply resistors for extra protection. Otherwise slight voltage shift may cause enormou current change and burn out failure would happen.
2. Storage
① Do not open moisture proof bag before the products are ready to use.
② Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
③ The LEDs should be used within a year.
④ After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
⑤ The LEDs should be used within 168 hours (7 days) after opening the package.
⑥ If the moisture absorbent material (silicone gel) has faded away or the LEDs have exceeded the storag time, baking treatment should be performed using the following conditions.
⑦ Pre-curing treatment: 60±5℃ for 24 hours.
3. Thermal Management
① Because HP60M LED is a high power dissipation device, special and sufficient consideration in thermal management design must be made to optimize the thermal performance.
② Heat sink design is implemented in the device for an additional thermal connection. Since the device is capable of SMT process, tin must be spread both heat sink and solder pads areas to dissipate the heat.
③ A high thermal conductivity substrate, such as Aluminum or Copper plate etc, must be applied for external thermal management. It is strongly recommended that the outer heat sink or PCB dimension per LED can not be less than 25 x 25 x 1 (L x W x H) mm. The materials for outer heat sink can be FR4 on Aluminum, MCPCB, or FPC on Aluminum.
④ Special thermal designs are also recommended to take in outer heat sink design, such as FR4 PCB on Aluminum with thermal vias or FPC on Aluminum with thermal conductive adhesive, etc.
⑤ Sufficient thermal management must be conducted, or the die junction temperature will be over the limit under large electronic driving and LED lifetime will decrease critically.
4. Soldering Condition
① Soldering should not be done more than two times.
② While soldering, do not put stress on the LEDs during heating.
③ After soldering, do not warp the circuit board.
5. Soldering Iron
① For prototype builds or small series production runs it is possible to place and solder the LED by hand.
② Dispensing thermal conductive glue or grease on the substrates and follow its curing spec. Press LED housing to closely connect LED and substrate.
③ It is recommended to hand solder the leads with a solder tip temperature of 280°C for less than 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal.
④ Be careful because the damage of the product is often started at the time of the hand solder.
6. Handling Indications
During processing, mechanical stress on the surface should be minimized as much as possible.
Sharp objects of all types should not be used to pierce the sealing compound.
For more details, please contact us.
Email:Facebook @doublelight.com.cn
-
Product Details:
Place of Origin: China
Brand Name: Doule Light
Certification: RoHS/ REACH
Model Number: DL-PCB3535RGBCPayment & Shipping Terms:
Minimum Order Quantity: 1000pcs/Reel
Price: US$0.30-0.50 Per piece or Price Negotiable
Delivery Time: 10-12 woriking days after payment received
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
