1.9mm Height Top View 3528 Infrared Emitting Diode , Infrared Chip LED 850nm
Product Details:
Place of Origin: China
Brand Name: Double Light
Certification: ROHS/ REACH
Model Number: DL-TOP3528SIRC-2SIR120
Payment & Shipping Terms:
Minimum Order Quantity: 2,000pcs/Real
Price: US$ 0.02-0.05 per unit (Pieces) and negotiable
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
- Product Description
- parameter
-
Product Name:
1.9mm Height Top View 3528 Infrared Chip LED
Package:
Top View 3528 Infrared Chip LED
Emitted Color:
Infrared
Product Number:
DL-TOP3528SIRC-2SIR120
Color Temperature:
850nm
Lens Type:
Water Clear
Forward Voltage @20ma:
1.00-1.50V
Viewing Angle:
120 Deg
Forward Current:
50mA
Highlight:
ir emitting diode, 940nm infrared led
1.9mm Height Top View 3528 Infrared Emitting Diode , Infrared Chip LED 850nm
Features:
- Package in 8mm tape on 7" diameter reels.
- Built in 1 LED chip.
- Wide viewing angle.
- Soldering methods: Reflow Soldering.
- High performance.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The TOP3528 Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
- Besides, lightweight makes them ideal for miniature applications. etc.
Applications:
- PCB mounted infrared sensor.
- Infrared emitting for miniature light barrier.
- Floppy disk drive.
- Optoelectronic switch.
Package Dimension:
Part No. Chip Material Lens Color Source Color DL-TOP3528SIRC-2SIR120 GaAlAs/GaAs Water Clear Infrared Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.10mm (.004") unless otherwise specified.
3. Specifications are subject to change without notice.
Absolute Maximum Ratings at Ta=25℃
Parameters Symbol Max Unit Power Dissipation PD 90 mW Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
IFP 1000 mA Continuous Forward Current IF 50 mA Reverse Voltage VR 5 V Operating Temperature Range Topr -40℃ to +80℃ Storage Temperature Range Tstg -40℃ to +100℃ Soldering Temperature Tsld 260℃ for 5 Seconds Electrical Optical Characteristics at Ta=25℃
Parameters Symbol Min. Typ. Max. Unit Test Condition Radiant Intensity (Note 1) * Ee 8.0 15.0 --- mW/sr IF=20mA Viewing Angle (Note 2) * 2θ1/2 --- 120 --- Deg IF=20mA Rise Time Tr --- 20 --- nsec IF=20mA Fall Time Tf --- 30 --- nsec IF=20mA Peak Emission Wavelength λp --- 850 --- nm IF=20mA Spectral Bandwidth △λ --- 45 --- nm IF=20mA Forward Voltage VF 1.00 1.30 1.50 V IF=20mA Reverse Current IR --- --- 10 µA VR=5V Notes:
1. Luminous Intensity Measurement allowance is ± 10%.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Reliability Test Items And Conditions:
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%.
LTPD: 10%.
No. Item Test Conditions Test Hours/
Cycles
Sample
Sizes
Failure
Judgment
Criteria
Ac/
Re
1 Reflow Soldering TEMP.: 260℃+5℃
5secs
6mins 22pcs IR≧U×2
Ee≦L×0.8
VF≧U×1.2
U: Upper
Specification
Limit
L: Lower
Specification
Limit
0/1 2 Temperature Cycle H: +100℃ 15mins
∫
5 mins
∫
L: -40℃ 15mins
50Cycles 22pcs 0/1 3 Thermal Shock H: +100℃ 15mins
∫
10mins
∫
L: -10℃ 5mins
50Cycles 22pcs 0/1 4 High Temperature
Storage
TEMP.: +100℃ 1000hrs 22pcs 0/1 5 Lower Temperature
Storage
TEMP.: -40℃ 1000hrs 22pcs 0/1 6 DC Operating Life VCE=5V 1000hrs 22pcs 0/1 7 High Temperature/
High Humidity
85℃ / 85% R.H 1000hrs 22pcs 0/1 Reel Dimensions:
Carrier Tape Dimensions:
Loaded quantity 2000 PCS Per reel.
Please read the following notes before using the datasheets:
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture adsorbent material (silica gel) has fabled away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
5. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
6. Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded.
-
Product Details:
Place of Origin: China
Brand Name: Double Light
Certification: ROHS/ REACH
Model Number: DL-TOP3528SIRC-2SIR120
Payment & Shipping Terms:
Minimum Order Quantity: 2,000pcs/Real
Price: US$ 0.02-0.05 per unit (Pieces) and negotiable
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
