5mm Round PN junction Silicon Photodiode 940nm Peak Emission Wavelength
Product Details:
Place of Origin: China (mainland)
Brand Name: DOUBLE LIGHT
Certification: ISO9001:2008/ROHS
Model Number: DL-5586PD-1PD
Payment & Shipping Terms:
Minimum Order Quantity: 1,000pcs
Price: Negotiated
Packaging Details:
Dimensions per Unit:0.28 × 0.2 × 0.13 Meters
• Weight per Unit:3.5 Kilograms
• Units per Export Carton:40000
• Export Carton Dimensions L/W/H: 0.45 × 0.28 × 0.27 Meters
• Export Carton Weight:14.2 Kilograms
Delivery Time: 15 working days after received your payment
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per Day
- Product Description
- parameter
-
Product Name: 5mm Round PN Junction Silicon Photodiode Package: DIP 5mm Round Standard LEDs Emitted Color: Photodiode Receiver Peak Emission Wavelength: 940nm Lens Type: Water Clear Viewing Angle: 40 Deg Highlight: light emitting diode led , ir emitting diode 5Mm Round PN junction Silicon Photodiode 940nm Peak Emission Wavelength
This is our 5mm Round PN junction Silicon Photodiode, its lens color is water clear.
Features:
- Fast response time.
- High photo sensitivity.
- Small junction capacitance.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The DL-5586PD is a high speed and high sensitive PIN photodiode in a standard φ5 epoxy package. Due to its water clear epoxy the device is sensitive to visible and infrared radiation.
Applications:
- High speed photo detector.
- Automatic door sensor.
- Security system.
- Game machine.
- Camera.
Package Dimension:
Part No. Chip Material Lens Color Source Color DL-5586PD-1PD Silicon Water Clear Photodiode Receiver Notes:
- All dimensions are in millimeters (inches).
- Tolerance is ± 0.25mm (.010") unless otherwise noted.
- Protruded resin is 1.00mm (.039") max.
- Specifications are subject to change without notice.
Absolute Maximum Ratings at Ta=25℃
Parameters Symbol Max. Unit Power Dissipation PD 150 mW Reverse Voltage VR 30 V Operating Temperature Range Topr -25℃ to +80℃ Storage Temperature Range Tstg -40℃ to +85℃ Lead Soldering Temperature
[4mm (.157″) From Body]
Tsld 260℃ Electrical Optical Characteristics at Ta=25℃
Parameter Symbol Min Typ Max Unit Test Condition Spectral Sensitivity Δλ 700 — 1050 nm — Peak sensitivity Wavelength λ p — 940 — nm — View Angle 2θ1/2 35 40 45 deg VR=5V λ=940nm Angle off center Δθ -5 — 5 deg Open-Circuit Voltage Voc — 0.45 — V Ee=5.0mW/cm² Light Current IL 30 40 50 uA Ee=5.0mW/cm²
VR=5V
Dark Current ID — 5 30 nA VR=10V
Ee=0mW/cm²
Terminal Capacitance Ct — 30 — pF f=1MHz RiseTime tr — 50 — ns RL=1KΩ
VR=10V
Fall Time tf — 50 — ns Notes:
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Please read the following notes before using the datasheets:
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
3. Soldering Condition
3.1 Pb-free solder temperature profile.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
5. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
6. Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices equipment and machinery must be properly grounded.
-
Product Details:
Place of Origin: China (mainland)
Brand Name: DOUBLE LIGHT
Certification: ISO9001:2008/ROHS
Model Number: DL-5586PD-1PD
Payment & Shipping Terms:
Minimum Order Quantity: 1,000pcs
Price: Negotiated
Packaging Details:
Dimensions per Unit:0.28 × 0.2 × 0.13 Meters
• Weight per Unit:3.5 Kilograms
• Units per Export Carton:40000
• Export Carton Dimensions L/W/H: 0.45 × 0.28 × 0.27 Meters
• Export Carton Weight:14.2 Kilograms
Delivery Time: 15 working days after received your payment
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per Day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
