1206 Silicon Phototransistor 940nm Infrared Emitting Diode 30 Deg Reception Angle SMD LED diode
Product Details:
Place of Origin: China (mainland)
Brand Name: Double Light
Certification: ISO9001:2008,ROHS
Model Number: DL-R1206PD-1PD120
Payment & Shipping Terms:
Minimum Order Quantity: 10,00pcs
Packaging Details:
Dimensions per Unit:0.28 × 0.2 × 0.13 Meters
• Weight per Unit:3.5 Kilograms
• Units per Export Carton:40000
• Export Carton Dimensions L/W/H: 0.45 × 0.28 × 0.27 Meters
• Export Carton Weight:14.2 Kilograms
Delivery Time: 5-7 working days after received your payment
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 15,000,000pcs per Day
- Product Description
- parameter
-
Product Name: Infrared LEDs Diameter: 1206 Size Emitted Color: 940nm Infrared LED Peak Emission Wavelength: 940nm Chip Material: Silicon Lens Type: Black Forward Voltage @20ma: 1.1-1.4V Viewing Angle: 30 Deg Highlight: light emitting diode led , ir emitting diode 1206 Silicon Phototransistor 940nm Infrared Emitting Diode 30 Deg Reception Angle SMD LED diode
Features:
1. Fast response time.
2. Outline Package:3.2x1.6x2.33mm
3. High photo sensitivity.
4. Small junction capacitance.
5. Package in 8mm tape on 7” diameter reel.
6. The product itself will remain within RoHS compliant Version.Descriptions:
1. The 1206 SMD LED is a high speed and high sensitive silicon NPN phototransistor in miniature SMD package which is molded in a black epoxy with flat top view lens.
2. Due to its black epoxy, the device is spectrally matched to visible and infrared emitting diode.Applications:
1. Automatic door sensor.
2. Infrared applied system.
3. Counters and sorters.
4. Encoders.
5. Floppy disk drive.
6. Optoelectronic switch.
7. Video camera, tape and card readers.
8. Position sensors.
9. Copier.
10. Game machine.
11. Applicable to all kinds of mechanical keyboard launch requirements
12. Suitable for all kinds of infrared transmitting and receiving equipment
13. Infrared remote control transmitter is suitable for all kinds of electronic products
14. Applicable to all kinds of small household electrical appliance products for reflection applicationPart No. Chip Material Lens Color Source Color DL-R1206PD-1PD120 Silicon Black Phototransistor
Absolute Maximum Ratings at Ta=25℃Parameters Symbol Max. Unit Power Dissipation PD 100 mW Collector-Emitter Voltage
VCEO 30 V Emitter-Collector-Voltage VECO 5 V Collector Current IC 20 mA Operating Temperature Range Topr -40℃ to +80℃ Storage Temperature Range Tstg -40℃ to +85℃ Lead Soldering Temperature Tsld 260℃ for 5 Seconds
Electrical Optical Characteristics at Ta=25℃Parameters Symbol Min. Typ. Max. Unit Test Condition Collector-Emitter Breakdown Voltage BVCEO 30 --- --- V IC=100μA,
Ee=0mW/cm²Emitter-Collector Breakdown Voltage BVECO 5 --- --- V IE=100μA,
Ee=0mW/cm²Viewing Angle * 2θ 1/2 --- 30 --- Deg Peak Emission Wavelength λp --- 940 --- nm Rang Of Spectral Bandwidth λ0.5 700 --- 1200 nm
Please read the following notes before using the product:
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture adsorbent material (silica gel) has fabled away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
5. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
6. Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded.
Company introduction:
HongKong Double Light Electronics was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines, which include THT LEDs, chip LEDs, LED displays, infrared emitting diode LEDs, dot matrix, LCD backlights and LED lighting fixtures.
Other hot sell products
-
Product Details:
Place of Origin: China (mainland)
Brand Name: Double Light
Certification: ISO9001:2008,ROHS
Model Number: DL-R1206PD-1PD120
Payment & Shipping Terms:
Minimum Order Quantity: 10,00pcs
Packaging Details:
Dimensions per Unit:0.28 × 0.2 × 0.13 Meters
• Weight per Unit:3.5 Kilograms
• Units per Export Carton:40000
• Export Carton Dimensions L/W/H: 0.45 × 0.28 × 0.27 Meters
• Export Carton Weight:14.2 Kilograms
Delivery Time: 5-7 working days after received your payment
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 15,000,000pcs per Day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
