5mm Round Standard T-1 3/4 Type LED Emitting Diode 45 Deg Viewing Angle
Product Details:
Place of Origin: China (mainland)
Brand Name: Double Light
Certification: ISO9001:2008/ROHS
Model Number: DL-503IRTA-2IR45
Payment & Shipping Terms:
Minimum Order Quantity: 1000pcs/pack
Price: Negotiated
Packaging Details:
Dimensions per Unit:0.28 × 0.2 × 0.13 Meters
• Weight per Unit:3.5 Kilograms
• Units per Export Carton:40000
• Export Carton Dimensions L/W/H: 0.45 × 0.28 × 0.27 Meters
• Export Carton Weight:14.2 Kilograms
Delivery Time: 10-15 working days after received your payment
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 15,000,000pcs per Day
- Product Description
- parameter
-
Product Name: 5mm Round 940nm Infrared LED Package: Standard T-1 3/4 Diameter Package Forward Voltage @20ma: 0.8-1.8V Viewing Angle: 45Deg Forward Current: 100mA Peak Emission Wavelength: 940nm Package Type: Through Hole Power: 100mW Highlight: light emitting diode led , 940nm infrared led 5mm Round Standard T-1 3/4 Type Infrared Blue Transparent Emitting Diode Led
Features:
- Standard T-1 3/4 diameter package.
- Low forward voltage.
- Viewing angle=45°.
- Reliable and rugged.
- The product itself will remain within RoHS complaint Version.
Descriptions:
The device is spectrally matched with silicon photodiode and phototransistor.
Applications:
- Floppy disk drive.
- Optoelectronic switch.
- Camera.
- Free air transmission system.
- Video.
Bin Code TesTest Condition
Part No. Chip Material Lens Color Source Color DL-503IRTA-2IR45
GaAlAs
Blue Transparent
Infrared
Notes:
- All dimensions are in millimeters (inches).
- Tolerance is ± 0.25 mm (.010″) unless otherwise specified.
- Protruded resin under flange is 1.00 mm (.039″) max.
- Specifications are subject to change without notice.
Package Dimension:
Absolute Maximum Ratings at Ta=25
Parameters Symbol Max. Unit Power Dissipation PD 100 mW Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
IFP 1.00 A Forward Current IF 100 mA Reverse Voltage VR 5 V Operating Temperature Range Topr -40℃ to +80℃ Storage Temperature Range Tstg -40℃ to +85℃ Soldering Temperature Tsld 260℃ for 5 Seconds Electrical Optical Characteristics at Ta=25℃
Parameters Symbol Min. Typ. Max. Unit Test Condition Radiant Intensity (Note 1) * Ee 5.5 9.0 --- mW/sr IF=20mA --- 22.0 --- IF=100mA, tp=100µs, tp/T=0.01 Viewing Angle (Note 2) * 2θ1/2 --- 45 --- Deg IF=20mA Peak Emission Wavelength λp --- 940 --- nm IF=20mA (Note 3) Spectral Bandwidth △λ --- 50 --- nm IF=20mA Forward Voltage VF 0.80 1.20 1.50 V IF=20mA --- 1.60 1.80 IF=100mA, tp=100µs, tp/T=0.01 Reverse Current IR --- --- 10 µA VR=5V Notes:
- Luminous (Radiant) Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λp) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
Typical Electrical / Optical Characteristics Curves(25℃ Ambient Temperature Unless Otherwise Noted)
Please read the following notes before using the product:
1. Over-current-proof
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
2. Repairing
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90% RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70% RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
3. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
4. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
Company Introduction
HongKong Double Light Electronics Technology Co. Ltd was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines, which include THT LEDs, chip LEDs, LED displays, infrared LEDs, dot matrix, LCD backlights and LED lighting fixtures.
Please contact with me to help you find your right product and get your best price.
-
Product Details:
Place of Origin: China (mainland)
Brand Name: Double Light
Certification: ISO9001:2008/ROHS
Model Number: DL-503IRTA-2IR45
Payment & Shipping Terms:
Minimum Order Quantity: 1000pcs/pack
Price: Negotiated
Packaging Details:
Dimensions per Unit:0.28 × 0.2 × 0.13 Meters
• Weight per Unit:3.5 Kilograms
• Units per Export Carton:40000
• Export Carton Dimensions L/W/H: 0.45 × 0.28 × 0.27 Meters
• Export Carton Weight:14.2 Kilograms
Delivery Time: 10-15 working days after received your payment
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 15,000,000pcs per Day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
