High Power Green 1W LED Chip LED Light Components DC2.55V 350mA
Product Details:
Place of Origin: China
Brand Name: Double LIGHT
Certification: ISO9001:2008,Rosh
Model Number: DL-TOP3045W-1W
Payment & Shipping Terms:
Minimum Order Quantity: 1000 PCS
Packaging Details: Dimensions per Unit:0.28 × 0.2 × 0.13 Meters
• Weight per Unit:3.5 Kilograms
• Units per Export Carton:40000
• Export Carton Dimensions L/W/H: 0.45 × 0.28 × 0.27 Meters
• Export Carton Weight:14.2 Kilograms
Delivery Time: 5-7 working days after received your payment
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 15,000,000pcs per Day
- Product Description
- parameter
-
Product Name:
1W High Power 3045 White LED
Emitted Color:
White Color LED
Test Condition:
IF=350ma
Viewing Angle:
120 Deg
Luminous Flux:
45lm
Forward Voltage:
1.8-2.2v
Chip Material:
AllnGaP
Peak Emission Wavelength:
625nm
Highlight:
led light chip, high power led chip
1W High Power Red Color LED
LED High Power LED Chip 1W, Green, DC2.55V input, 350mA output, Energy Saving Lamp, Star, Component Chip
Precautions for Use:
1. Over-current-proofCustomer must not use the device in reverse and should apply resistors for extra protection. Otherwise slight voltage shift may cause abnormal current change and burn out failure would happen.
2. Storage
①Do not open moisture proof bag before the products are ready to be used.
②Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
③The LEDs should be used within a year.
④After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
⑤The LEDs should be used within 168 hours (7 days) after opening the package.⑥If the moisture absorbent material (silicone gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions:
Pre-curing treatment: 60±5℃ for 24 hours.3. Thermal Management
①Because HP60M LED is a high power dissipation device, special and sufficient consideration in thermal management design must be made to optimize the thermal performance.
②Heat sink design is implemented in the device for an additional thermal connection. Since the device is capable of SMT process, tin must be spread both heat sink and solder pads areas to dissipate the heat.
③A high thermal conductivity substrate, such as Aluminum or Copper plate etc, must be applied for external thermal management. It is strongly recommended that the outer heat sink or PCB dimension per LED can not be less than 25 x 25 x 1 (L x W x H) mm. The materials for outer heat sink can be FR4 on Aluminum, MCPCB, or FPC on Aluminum.
④Special thermal designs are also recommended to take in outer heat sink design, such as FR4 PCB on Aluminum with thermal vias or FPC on Aluminum with thermal conductive adhesive, etc.
⑤Sufficient thermal management must be conducted, or the die junction temperature will be over the limit under large electronic driving and LED lifetime will decrease critically.
4. Soldering Condition
①Soldering should not be done more than two times.
②While soldering, do not put stress on the LEDs during heating.
③After soldering, do not warp the circuit board.
5. Soldering Iron
①For prototype builds or small series production runs it is possible to place and solder the LED by hand.
②Dispensing thermal conductive glue or grease on the substrates and follow its curing spec. Press LED housing to closely connect LED and substrate.
③It is recommended to hand solder the leads with a solder tip temperature of 280°C for less than 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal.
④Be careful because the damage of the product is often started at the time of the hand solder.
6. Handling Indications
During processing, mechanical stress on the surface should be minimized as much as possible. Sharp objects of all types should not be used to pierce the sealing compound.
Absolute Maximum Ratings at Ta=25℃
Parameters
Symbol
Rating
Units
Forward Current
IF
350
mA
PeakPulseCurrent (tp≤100μs, Duty cycle=0.25)
I pulse
500
mA
Reverse Voltage
VR
5
V
LED Junction Temperature
Tj
125
℃
Operating Temperature Range
Topr
-40 to +80
℃
Storage Temperature Range
Tstg
-40 to +100
℃
Soldering Time at 260 ℃ (Max.)
Tsol
5
Seconds
Notes:
1. Proper current derating must be observed to maintain junction temperature below the maximum.
2. LEDs are not designed to be driven in reserve bias.Electrical Optical Characteristics at Ta=25℃
Parameters
Symbol
Min.
Typ.
Max.
Unit
Test Condition
Viewing Angle [1]
2θ1/2
---
140
--
Deg
IF=350mA
Forward Voltage [2]
VF
2.0
2.20
3.00
V
IF=350mA
Reverse Current
IR
---
---
10
µA
VR=5V
Peak Emission Wavelength
λp
---
632
---
nm
IF=350mA
Dominant Wavelength
λd
---
624
---
nm
IF =350mA
Spectrum Radiation Bandwidth
Δλ
---
18
---
nm
IF=350mA
Luminous Flux
Фv
25
30
---
lm
IF=350mA
Notes:
1. 2θ1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value. 2. Forward Voltage measurement tolerance: ±0.1V
High Power LED Package Dimension:
-
Product Details:
Place of Origin: China
Brand Name: Double LIGHT
Certification: ISO9001:2008,Rosh
Model Number: DL-TOP3045W-1WPayment & Shipping Terms:
Minimum Order Quantity: 1000 PCS
Packaging Details: Dimensions per Unit:0.28 × 0.2 × 0.13 Meters
• Weight per Unit:3.5 Kilograms
• Units per Export Carton:40000
• Export Carton Dimensions L/W/H: 0.45 × 0.28 × 0.27 Meters
• Export Carton Weight:14.2 Kilograms
Delivery Time: 5-7 working days after received your payment
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 15,000,000pcs per Day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
