square Super flux piranha led lights with Dome 4 Lead super yellow flat led diode indicator lights for motorcycles
Product Details:
Place of Origin: China
Brand Name: Double Light
Certification: RoHS/ REACH
Model Number: DL- U30UYCA- 2UY70
Payment & Shipping Terms:
Minimum Order Quantity: 1,000pcs/Real
Price: US$ 0.015-0.035 per unit (Pieces) and can be discussed
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
- Product Description
- parameter
-
Product Name: Piranha Super Flux With 3mm Dome 4 Lead Super Yellow LED Indicators Package: Piranha Super Flux LED Emitted Color: Super Yellow Product Number: DL-U30UYCA-2UY70 Dominant Wavelength: 590nm Lens Type: Water Clear Forward Voltage @20ma: 1.8-2.2V Viewing Angle: 70 Deg Application: Indicator Light,Electric Luminous Intensity: 1000-1500mcd Highlight: >multi color led diode , >green light emitting diode This is Piranha Super Flux with 3mm Dome 4 Lead Super Yellow LED Indicators, its lens color is water clear and the emitting color of this size is changeable.
Features:
- Fewer LEDs required.
- Low profile.
- Lowers lighting system cost.
- Super flux output.
- Viewing angle=70°.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- This revolutionary package design allows the light designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions.
- The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired light appearance.
Applications:
- Automotive exterior lighting.
- Electronic signs and signals.
- Special lighting application.
Package Dimension:
Part No. Chip Material Lens Color Source Color DL-U30UYCA-2UY70 AlGaInP Water Clear Super Yellow Notes:
- All dimensions are in millimeters (inches).
- Tolerance is ± 0.25mm (.010″) unless otherwise noted.
- An epoxy meniscus may extend about 1.50mm (.059″) down the leads.
- Specifications are subject to change without notice.
Absolute Maximum Ratings at Ta=25℃
Parameters Symbol Max. Unit Power Dissipation PD 82 mW Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
IFP 70 mA Forward Current IF 50 mA Reverse Voltage VR 5 V Electrostatic Discharge (HBM) ESD 2000 V Operating Temperature Range Topr -40℃ to +85℃ Storage Temperature Range Tstg -40℃ to +100℃ Lead Soldering Temperature Tsld 260℃ for 5 Seconds Electrical Optical Characteristics at Ta=25℃
Parameters Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity * IV 1000 1500 --- mcd IF=20mA (Note 1) Viewing Angle * 2θ1/2 --- 70 --- Deg IF=20mA (Note 2) Peak Emission Wavelength λp --- 592 --- nm IF=20mA Dominant Wavelength λd --- 590 --- nm IF=20mA (Note 3) Spectrum Radiation Bandwidth Δλ --- 15 --- nm IF=20mA Forward Voltage VF 1.80 2.20 ---- V IF=20mA Reverse Current IR --- --- 10 µA VR=5V Notes:
- Luminous Intensity (Flux) is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Please read the following notes before using the product:
- Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).
- Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
- Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
- Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
- Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices equipment and machinery must be properly grounded.
Choose DOUBLE LIGHT, your expert LED components nearby!
Please contact with me to help you find your right product and get your best price .
Tel: 86-755-82853859
Fax: 86-755-83229774
Email:wendy@doublelight.com.cn
Wechat:ywj199111103964
Skype:wendy@doublelight.com.cn -
Product Details:
Place of Origin: China
Brand Name: Double Light
Certification: RoHS/ REACH
Model Number: DL- U30UYCA- 2UY70
Payment & Shipping Terms:
Minimum Order Quantity: 1,000pcs/Real
Price: US$ 0.015-0.035 per unit (Pieces) and can be discussed
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
