Blue Color 8mm Round Indicator LED With Flange , 20 Deg Viewing Angle
Product Details:
Place of Origin: China
Brand Name: Doule Light
Certification: RoHS/ REACH
Model Number: DL-804BCA-3B20
Payment & Shipping Terms:
Minimum Order Quantity: 5,000pcs/Real
Price: US$ 0.023-0.040 per unit (Pieces)
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
- Product Description
- parameter
-
Product Name: Blue Color DIP 8mm Round Standard Type With Flange LED Package: DIP 8mm Round Standard Type Emitted Color: Blue Product Number: DL-804BCA-3B20 Dominant Wavelength: 468nm Lens Type: Water Clear Forward Voltage @20ma: 3.0-4.0V Viewing Angle: 20 Deg Highlight: multi color led diode , green light emitting diode This is DIP 8mm Round Standard Type With Flange Blue LED, its lens color is water clear.
Features:
- Low forward voltage.
- Infrared Emitting Diode.
- Viewing angle =20°.
- Reliable and rugged.
- The product itself will remain within RoHS complaint Version.
Descriptions:
- The series is specially designed for applications requiring higher brightness.
- The LED lamps are available with different colors, intensities, epoxy colors, etc.
Applications:
- QA equipment.
- Backlighting of LCD.
- Automotive equipment.
- Replacement of conventional light bulbs and fluorescent lamps.
- Indoor and out door displays, etc.
Package Dimension:
Part No. Chip Material Lens Color Source Color BL-804BCA-3B20 InGaN Water Clear Blue Notes:
- All dimensions are in millimeters (inches).
- Tolerance is ± 0.25mm (.010″) unless otherwise noted.
- Protruded resin under flange is 1.00mm (.039″) max.
Absolute Maximum Ratings at Ta=25℃
Parameters Symbol Max. Unit Power Dissipation PD 95 mW Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
IFP 100 mA Forward Current IF 25 mA Reverse Voltage VR 5 V Electrostatic Discharge (HBM) ESD 1000 V Operating Temperature Range Topr -40℃ to +80℃ Storage Temperature Range Tstg -40℃ to +85℃ Lead Soldering Temperature
[4mm (.157″) From Body]
Tsld 260℃ for 5 Seconds Notes:
- Proper current derating must be observed to maintain junction temperature below the maximum.
- LEDs are not designed to be driven in reserve bias.
Electrical Optical Characteristics at Ta=25℃
Parameters Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity IV 10000 15000 --- mcd IF=20mA (Note 1) Viewing Angle 2θ1/2 --- 20 --- Deg IF=20mA (Note 2) Peak Emission Wavelength λp --- 462 --- nm IF=20mA (Note 3) Dominant Wavelength λd --- 468 --- nm Spectral Line Half-Width △λ --- 25 --- nm IF=20mA Forward Voltage VF 3.0 3.3 4.0 V IF=20mA Reverse Current IR --- --- 10 µA VR=5V Notes:
- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- It use many parameters that correspond to the CIE 1931 2°. X, Y, and Z are CIE 1931 2° values of Red, Green and Blue content of the measurement.
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Reliability Test Items And Conditions:
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%. LTPD: 10%.
1) Test Items and Results:
Test Item Standard Test Method Test Conditions Note Number of Damaged Resistance to Soldering Heat JEITA ED-4701
300 302
Tsld=260±5℃, 10sec 3mm from the base of the epoxy bulb 1 time 0/100 Solder ability JEITA ED-4701
300 303
Tsld=235±5℃, 5sec
(using flux)
1time
over 95%
0/100 Thermal Shock JEITA ED-4701
300 307
0℃~100℃ 15sec, 15sec 100 cycles 0/100 Temperature Cycle JEITA ED-4701
100 105
-40℃~25℃~100℃~25℃ 30min,5min,30min,5min 100 cycles 0/100 Moisture Resistance Cycle JEITA ED-4701
200 203
25℃~65℃~-10℃ 90%RH 24hrs/1cycle 10 cycles 0/100 High Temperature Storage JEITA ED-4701
200 201
Ta=100℃ 1000hrs 0/100 Terminal Strength
(Pull test)
JEITA ED-4701
400 401
Load 10N (1kgf)
10±1sec
No noticeable damage 0/100 Terminal Strength (bending test) JEITA ED-4701
400 401
Load 5N (0.5kgf)
0°~90°~0° bend 2 times
No noticeable damage 0/100 Temperature Humidity Storage JEITA ED-4701
100 103
Ta=60℃, RH=90% 1000hrs 0/100 Low Temperature Storage JEITA ED-4701
200 202
Ta=-40℃ 1000hrs 0/100 Steady State Operating Life Ta=25℃, IF=20mA 1000hrs 0/100 Steady State Operating Life of High Humidity Heat Ta=60℃, RH=90%, IF=20mA 500hrs 0/100 Steady State Operating Life of Low Temperature Ta=-30℃, IF=30mA 1000hrs 0/100 2) Criteria for Judging the Damage:
Item Symbol Test Conditions Criteria for Judgment Min Max Forward Voltage VF IF=20mA --- F.V.*)×1.1 Reverse Current IR VR=5V --- F.V.*)×2.0 Luminous Intensity IV IF=20mA F.V.*)×0.7 --- *) F.V.: First Value.
Please read the following notes before using the product:
- Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).
- Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
- Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
- Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
- Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
- Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices equipment and machinery must be properly grounded.
-
Product Details:
Place of Origin: China
Brand Name: Doule Light
Certification: RoHS/ REACH
Model Number: DL-804BCA-3B20
Payment & Shipping Terms:
Minimum Order Quantity: 5,000pcs/Real
Price: US$ 0.023-0.040 per unit (Pieces)
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
