Right Angle with based Bi color Led Indicator Super Red & Yellow Green Led Lamps
Product Details:
Place of Origin: China (mainland)
Brand Name: DOUBLE LIGHT
Certification: ISO9001:2008/ROHS
Model Number: DL-H59RGM-C
Payment & Shipping Terms:
Minimum Order Quantity: 1000PCS
Delivery Time: 5-7 working days after received your payment
Payment Terms: L/C, T/T, Western Union,paypal
Supply Ability: 15,000,000pcs per Dayment Payment Terms: L/C, T/T, Western Union,paypal Supply Ability: 15,000,000pcs per Day
- Product Description
- parameter
-
Product Name: 5mm Bi-Color LEDs Package: DIP 5MM With Plastic Holder Emitted Color: Hyper Red & Yellow Green Peak Emission Wavelength: 635nm & 570nm Lens Type: White Diffused Forward Voltage @20ma: Typ:2.0/2.8v Viewing Angle: 30-120 Deg Luminous Intensity: 100-200mcd Highlight: bi colour led , dual colour led Right Angle with based Bi color Led Indicator Super Red & Yellow Green Led Lamps with plastical holderPart No. Chip Material Lens Color Source Color DL-H59RGMA-C R AlGaInP White Diffused Hyper Red G GaP Yellow Green Features:
- Low power consumption.
- High efficiency and low cost.
- Good control and free combinations on the colors of LED lamps.
- Good lock and easy to assembly.
- Stackable and easy to assembly.
- Stackable vertically and easy to assembly.
- Versatile mounting on P.C board or panel.
- Stackable horizontally and easy to assembly.
- The product itself will remain within RoHS compliant version.
Descriptions:
- ARRAY=Plastic Holder + Combinations of Lamps.
- The array will easily mount be applicable on any panel up to.
Applications:
- TV set.
- Monitor.
- Telephone.
- Computer.
- Circuit board, etc
Right Angle with based 5mm Bi-Color LEDs Absolute Maximum Ratings at Ta=25℃
Parameters Symbol Max. Unit Power Dissipation Hyper Red PD 80 mW Yellow Green 80 Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
IFP 100 mA Forward Current Hyper Red IF 25 mA Yellow Green IF 25 mA Reverse Voltage VR 5 V Electrostatic Discharge
(HBM)
Hyper Red ESD 2000 V Yellow Green 2000 Operating Temperature Range Topr -40℃ to +85℃ Storage Temperature Range Tstg -40℃ to +100℃ Lead Soldering Temperature
[4mm (.157″) From Body]
Tsld 260℃ for 5 Seconds 5mm Bi-Color LEDs with plastic holder Electrical Optical Characteristics at Ta=25℃
Parameters Symbol Emitting Color Min. Typ. Max. Unit Test Condition Luminous Intensity * IV Hyper Red 100 200 --- mcd IF=20mA
(Note 1)
Yellow Green 50 100 --- Viewing Angle * 2θ1/2 Hyper Red --- 60 --- Deg IF=20mA
(Note 2)
Yellow Green --- 60 --- Peak Emission Wavelength λp Hyper Red --- 632 --- nm IF=20mA Yellow Green --- 572 --- Dominant Wavelength λd Hyper Red --- 624 --- nm IF=20mA
(Note 3)
Yellow Green --- 575 --- Spectral Line Half-Width △λ Hyper Red --- 20 --- nm IF=20mA Yellow Green --- 15 --- Forward Voltage VF Hyper Red 1.80 2.20 2.80 V IF=20mA Yellow Green 1.80 2.20 2.80 Reverse Current IR Hyper Red --- --- 10 µA VR=5V Yellow Green --- --- 10 Notes:
Luminous Intensity Measurement allowance is ± 10%.- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device
- Please read the following notes before using the product:
-
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
3. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
4. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
5. Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices equipment and machinery must be properly grounded.
Company introduction:
HongKong Double Light Electronics was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines, which include THT LEDs, chip LEDs, LED displays, infrared LEDs, dot matrix, LCD backlights and LED lighting fixtures.
why choose DOUBLE LIGHT?
1. Well-known chip material
2. 99.99% gold wire bonding
3. 3 years warranty
4. Over 10 years work experience technical service team
5. 24 hours service Professional sales team
6. Free Sample is available
7. Fast delivery
8.100% QC inspection Before Shippment
9. Aiming at the consult of "high quality, zero defect”, give you the best quality, best service.
-
Product Details:
Place of Origin: China (mainland)
Brand Name: DOUBLE LIGHT
Certification: ISO9001:2008/ROHS
Model Number: DL-H59RGM-C
Payment & Shipping Terms:
Minimum Order Quantity: 1000PCS
Delivery Time: 5-7 working days after received your payment
Payment Terms: L/C, T/T, Western Union,paypal
Supply Ability: 15,000,000pcs per Dayment Payment Terms: L/C, T/T, Western Union,paypal Supply Ability: 15,000,000pcs per Day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
