0603 Package Red and Warm White dual color smd led Chip Yellow Diffused Lens
Product Details:
Place of Origin: China
Brand Name: Double Light
Certification: RoHS/ REACH
Model Number: DL-PCBE0603SRW30
Payment & Shipping Terms:
Minimum Order Quantity: 5,000pcs/Real
Price: US$ 0.015-0.020 per unit (Pieces)
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
- Product Description
- parameter
-
Product Name: 0.60mm Height 0603 Package Bi-color (Multi-color) Chip LED Package: 0603 Package SMD LED Emitted Color: Hyper Red & Warm White Product Number: DL-PCB0603SRW30 Color Temperature: Red:620nm,Warm White:X:0.50,Y:0.46 Lens Type: Yellow Diffused Forward Voltage @20ma: Red:2.8-3.0V, Warm White:1.8-2.1V Viewing Angle: Red:120 Deg, Warm White:120 Deg Highlight: common anode bi color led , bi colour led This is our 0.60mm Height 0603 Package Red and Warm White Bi-color (Multi-color) Chip LED,its emitting color is able Bi-color and Multi-color.
Part No. Chip Material Lens Color Source Color DL-PCBE0603SRW30 R AlGaInP Yellow Diffused Hyper Red W InGaN Warm White Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.10mm (.004″) unless otherwise specified.
3. Specifications are subject to change without notice.
Features:
- Package in 8mm tape on 7″ diameter reel.
- Compatible with automatic placement equipment.
- Compatible with infrared and vapor phase reflow solder process.
- Bi-color type.
- Color: Hyper Red. & Warm White
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The SMD 0603 LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
- Besides, lightweight makes them ideal for miniature applications, etc.
Applications:
- Automotive: Backlighting in dashboard and switch.
- Telecommunication: Indicator and backlighting in telephone and fax.
- Flat backlight for LCD, switch and symbol.
- Status indicator.
- General use.
Absolute Maximum Ratings at Ta=25℃
Parameters Symbol Emitting Color Max. Unit Power Dissipation PD Hyper Red 65 mW Warm White 85 Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
IFP Hyper Red 100 mA Warm White 100 Continuous Forward Current IF Hyper Red 25 mA Warm White 30 Reverse Voltage VR 5 V Electrostatic Discharge (HBM) ESD 2000 V Operating Temperature Range Topr -40℃ to +80℃ Storage Temperature Range Tstg -40℃ to +85℃ Soldering Temperature Tsld 260℃ for 5 Seconds Electrical Optical Characteristics at Ta=25℃
Parameters Symbol Emitting Color Min. Typ. Max. Unit Test Condition Luminous Intensity IV Hyper Red 80 150 --- mcd IF=20mA
(Note 1)
Warm White 250 400 --- Viewing Angle 2θ1/2 Hyper Red --- 120 --- Deg IF=20mA
(Note 2)
Warm White --- 120 --- Peak Emission Wavelength λp Hyper Red --- 620 --- nm IF=20mA Chromaticity Coordinates X Warm White 0.46 0.50 Y 0.42 0.46 Forward Voltage VF Hyper Red 2.80 2.90 3.00 V IF=20mA Warm White 1.80 2.00 2.10 Reverse Current IR Hyper Red --- --- 10 µA VR=5V Warm White Notes:
1. Luminous Intensity Measurement allowance is ± 10%.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Hyper Red:
CIE Chromaticity Diagram:
Chromaticity Coordinates Specifications for Bin Rank
(IF=20mA, Ta=25℃)
Color Group Chromaticity Coordinate Group Warm White Full X 0.4600 0.4750 0.4850 0.5000 Y 0.4200 0.4350 0.4450 0.4600 Notes:
- Color coordinates measurement allowance is ± 0.01.
- One delivery will include up to two consecutive color ranks and three luminous intensity ranks of the products the quantity-ratio of the ranks is decided by Double Light
Reliability Test Items And Conditions:
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%.
LTPD: 10%.
1) Test Items and Results:
No. Test Item Test Hours/Cycles Test Conditions Sample Size Ac/Re 1 Resistance to Soldering Heat 6 Min Tsld=260±5℃,
Min. 5sec
25pcs 0/1 2 Thermal Shock 300 Cycles H: +100℃ 5min ∫ 10 sec
L: -10℃ 5min
25pcs 0/1 3 Temperature Cycle 300 Cycles H: +100℃ 15min ∫ 5min
L: -40℃ 15min
25pcs 0/1 4 High Temperature Storage 1000Hrs. Temp: 100℃ 25pcs 0/1 5 DC Operating Life 1000Hrs. IF=20mA 25pcs 0/1 6 Low Temperature Storage 1000Hrs. Temp: -40℃ 25pcs 0/1 7 High Temperature/ High Humidity 1000Hrs. 85℃/85%RH 25pcs 0/1 2) Criteria for Judging the Damage:
Item Symbol Test Conditions Criteria for Judgment Min Max Forward Voltage VF IF=20mA --- F.V.*)×1.1 Reverse Current IR VR=5V --- F.V.*)×2.0 Luminous Intensity IV IF=20mA F.V.*)×0.7 --- *) F.V.: First Value.
Reel Dimensions:
Carrier Tape Dimensions:
Loaded quantity 4000 PCS Per reel.
Please read the following notes before using the product:
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture adsorbent material (silica gel) has fabled away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
5. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
6. Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded.
Please be free to contact us.
Email: Facebook@doublelight.com.cn
Whatsapp: 86 13750005407
-
Product Details:
Place of Origin: China
Brand Name: Double Light
Certification: RoHS/ REACH
Model Number: DL-PCBE0603SRW30
Payment & Shipping Terms:
Minimum Order Quantity: 5,000pcs/Real
Price: US$ 0.015-0.020 per unit (Pieces)
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
