Hyper Red AlGaInP Bi Color LED 5mm Lamp Indicator 75mW
Product Details:
Place of Origin: China
Brand Name: Double Light
Certification: RoHS/ REACH
Model Number: DL-509SRPGCA-C
Payment & Shipping Terms:
Minimum Order Quantity: 1,000pcs/bag
Price: US$ 0.025-0.03per unit (Pieces)
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
- Product Description
- parameter
-
Product Name: 5mm Standard T-1 3/4 Type Bi-Color Hyper Red & Green LEDs Package: 5mm Standard T-1 3/4 Type DIP LED Emitted Color: Hyper Red & Pure Green Product Number: DL-509SRPGCA-C Color Temperature: Red: 624nm, Green: 520nm Forward Voltage @20ma: Red:1.8-2.8V, Green:2.8-3.6V Highlight: Hyper Red Bi Color LED , AlGaInP Bi Color LED , 75mW Dual Color Led 
This is our 5mm Standard T-1 3/4 Type Bi-Color Hyper Red & Green LEDs, the 5mm Bi-Color series contain two integral chips and is available bicolor, the colors can do as you need.
Part No. Chip Material Lens Color Source Color DL-509SRPGCA-A R AlGaInP Water Clear Hyper Red G GaP Green Notes:
- All dimensions are in millimeters (inches).
- Tolerance is ± 0.25mm (.010″) unless otherwise noted.
- Protruded resin under flange is 1.00mm (.039″) max.
Specifications are subject to change without notice.
Features:
- 5mm standard T-1 3/4 type.
- Bi-color: Hyper Red & Pure Green.
- Uniform light output.
- Low power consumption.
- I.C. Compatible.
- Long life-solid state reliability.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The lamp contain two integral chips and is available bicolor.
- The Hyper Red and Yellow Green light is emitted by diodes of AlGaInP and GaP respectively.
- White Diffused lens color.
Applications:
- TV set.
- Monitor.
- Telephone.
- Computer.
- Circuit board, etc.
Absolute Maximum Ratings at Ta=25℃
Parameters Symbol Max. Unit Power Dissipation Hyper Red PD 60 mW Yellow Green 75 Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
IFP 100 mA Forward Current Hyper Red IF 25 mA Yellow Green IF 25 mA Reverse Voltage VR 5 V Electrostatic Discharge
(HBM)
Hyper Red ESD 2000 V Yellow Green 2000 Operating Temperature Range Topr -40℃ to +85℃ Storage Temperature Range Tstg -40℃ to +100℃ Lead Soldering Temperature
[4mm (.157″) From Body]
Tsld 260℃ for 5 Seconds Electrical Optical Characteristics at Ta=25℃
Parameters Symbol Emitting Color Min. Typ. Max. Unit Test Condition Luminous Intensity * IV Hyper Red 400 500 --- mcd IF=20mA
(Note 1)
Green 2000 3000 --- Viewing Angle * 2θ1/2 Hyper Red --- 60 --- Deg IF=20mA
(Note 2)
Green --- 60 --- Peak Emission Wavelength λp Hyper Red --- 632 --- nm IF=20mA Green --- 525 --- Dominant Wavelength λd Hyper Red --- 624 --- nm IF=20mA
(Note 3)
Green --- 520 --- Spectral Line Half-Width △λ Hyper Red --- 20 --- nm IF=20mA Green --- 15 --- Forward Voltage VF Hyper Red 1.80 2.20 2.80 V IF=20mA Green 2.80 2.20 3.60 Reverse Current IR Hyper Red --- --- 10 µA VR=5V Green --- --- 10 Notes:
- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Reliability Test Items And Conditions:
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%. LTPD: 10%.
1) Test Items and Results:
Test Item Standard Test Method Test Conditions Note Number of Damaged Resistance to Soldering Heat JEITA ED-4701
300 302
Tsld=260±5℃, 10sec 3mm from the base of the epoxy bulb 1 time 0/100 Solder ability JEITA ED-4701
300 303
Tsld=235±5℃, 5sec
(using flux)
1time
over 95%
0/100 Thermal Shock JEITA ED-4701
300 307
0℃~100℃ 15sec, 15sec 100 cycles 0/100 Temperature Cycle JEITA ED-4701
100 105
-40℃~25℃~100℃~25℃ 30min,5min,30min,5min 100 cycles 0/100 Moisture Resistance Cycle JEITA ED-4701
200 203
25℃~65℃~-10℃ 90%RH 24hrs/1cycle 10 cycles 0/100 High Temperature Storage JEITA ED-4701
200 201
Ta=100℃ 1000hrs 0/100 Terminal Strength
(Pull test)
JEITA ED-4701
400 401
Load 10N (1kgf)
10±1sec
No noticeable damage 0/100 Terminal Strength (bending test) JEITA ED-4701
400 401
Load 5N (0.5kgf)
0°~90°~0° bend 2 times
No noticeable damage 0/100 Temperature Humidity Storage JEITA ED-4701
100 103
Ta=60℃, RH=90% 1000hrs 0/100 Low Temperature Storage JEITA ED-4701
200 202
Ta=-40℃ 1000hrs 0/100 Steady State Operating Life Ta=25℃, IF=30mA 1000hrs 0/100 Steady State Operating Life of High Humidity Heat Ta=60℃, RH=90%, IF=30mA 500hrs 0/100 Steady State Operating Life of Low Temperature Ta=-30℃, IF=20mA 1000hrs 0/100 2) Criteria for Judging the Damage:
Item Symbol Test Conditions Criteria for Judgment Min. Max. Forward Voltage VF IF=20mA --- F.V.*)×1.1 Reverse Current IR VR=5V --- F.V.*)×2.0 Luminous Intensity IV IF=20mA F.V.*)×0.7 --- *) F.V.: First Value.
Please read the following notes before using the product:
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
3. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
4. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
5. Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices equipment and machinery must be properly grounded.
Indicator LED is a compact and efficient light-emitting component designed to provide clear visual status information in electronic devices, control panels, instruments, and industrial equipment. It uses low power while delivering bright and easily recognizable illumination, making it suitable for indicating operating status, power conditions, warnings, faults, and signal changes. Available in different colors, sizes, shapes, and mounting styles, indicator LEDs can meet various design and application requirements. Their fast response, long service life, stable performance, and low heat generation make them a practical alternative to traditional indicator lamps.
-
Product Details:
Place of Origin: China
Brand Name: Double Light
Certification: RoHS/ REACH
Model Number: DL-509SRPGCA-C
Payment & Shipping Terms:
Minimum Order Quantity: 1,000pcs/bag
Price: US$ 0.025-0.03per unit (Pieces)
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
