1W 3W High Power 3535 White SMD LED , Brightest Led Chip 2.8-3.8 Voltage
Product Details:
Place of Origin: China
Brand Name: Doule Light
Certification: RoHS/ REACH
Model Number: DL-PCB3535W
Payment & Shipping Terms:
Minimum Order Quantity: 100pcs/Real
Price: US$0.13-0.3 Per piece or Price Negotiable
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
- Product Description
- parameter
-
Product Name: 1W&3W High Power 3535 White LED Package: High Power LED Emitted Color: White Product Number: DL-PCB3535W Color Temperature: 2600-7000K Forward Voltage: 2.8-3.8V Forward Current: 350mA/700mA Luminous Flux: 120-130lm/ 220-240lm Viewing Angle: 90 Deg Highlight: warm white smd led , led smd chip Datasheet:DL-PCB3535W.pdf light source: WhiteDL-PCB3535W
This is our 1W&3W High Power 3535 White LED,its color is available in white, green, blue, red, yellow, Amber according to your need.
Part No. Chip Material Lens Color Source Color DL-PCB3535W InGaN White Diffused White Notes:
- The marked is cathode.
- All dimensions are in millimeters.
- Tolerance is ± 0.25 mm (.010″) unless otherwise noted.
Specifications are subject to change without notice.
Features:
- Small package with high efficiency
- Long operating life.
- Available in white, green, blue, red, yellow, Amber
- Typical color temperature: 5500-6500 K.
- View angle: 120°.
- Low voltage DC operated.
- The product itself will remain within RoHS compliant Version.
- ESD protection.
Applications:
- Reading lights (car, bus, aircraft).
- Portable (flashlight, bicycle).
- Mini_accent/Uplighters/Downlighters/Orientation.
- Bollards/Security/Garden.
- Cove/Undershelf/Task.
- Automotive rear combination lamps.
- Traffic signaling/Beacons/ Rail crossing and Wayside.
- Indoor/Outdoor Commercial and Residential Architectural.
- Edge_lit signs (Exit, point of sale).
- LCD Backlights/Light Guides.
Absolute Maximum Ratings at Ta=25℃
Parameters Symbol Max. Unit Power Dissipation PD 3000 mW Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
IFP 1000 mA Forward Current IF 350/700 mA Reverse Voltage VR 5 V Electrostatic Discharge (HBM) ESD 4000 V Operating Temperature Range Topr -10℃ to +70℃ Storage Temperature Range Tstg -20℃ to +80℃ Soldering Temperature Tsld 260℃ for 5 Seconds Electrical Optical Characteristics at Ta=25℃
Parameter Symbol Min. Typ. Max. Unit Test Condition Luminous Flux Φ 100 120 130 lm If=350mA (Note 1) 200 220 240 lm If=700mA (Note 1) Viewing Angle 2θ(1/2) --- 90 --- Deg (Note 2) Color Temperature TC 5500 --- 6500 K If=350/700mA Forward Voltage VF 2.80 3.40 3.80 V If=350/700mA Reverse Current IR --- --- 10 µA VR=5V Notes:
1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
Reliability Test Items And Conditions:
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%.
LTPD: 10%.
No. Item Test Conditions Test Hours/
Cycles
Sample
Sizes
Failure
Judgment
Criteria
Ac/
Re
1 Reflow Soldering TEMP.: 260℃+5℃
5secs
6mins 22pcs IR≧U*2
Ee≦L*0.8
VF≧U*1.2
U: Upper
Specification
Limit
L: Lower
Specification
Limit
0/1 2 Temperature Cycle H: +100℃ 15mins
∫
5 mins
∫
L: -40℃ 15mins
50Cycles 22pcs 0/1 3 Thermal Shock H: +100℃ 15mins
∫
10mins
∫
L: -10℃ 5mins
50Cycles 22pcs 0/1 4 High Temperature
Storage
TEMP.: +100℃ 1000hrs 22pcs 0/1 5 Lower Temperature
Storage
TEMP.: -40℃ 1000hrs 22pcs 0/1 6 DC Operating Life VCE=5V 1000hrs 22pcs 0/1 7 High Temperature/
High Humidity
85℃ / 85% R.H. 1000hrs 22pcs 0/1 Precautions for Use:
- Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift may cause enormous current change and burn out failure would happen.
- Storage
- Do not open moisture proof bag before the products are ready to use.
- Before opening the package, the Infrareds should be kept at 30℃ or less and 90%RH or less.
- The Infrared LED should be used within a year.
- After opening the package, the Infrareds should be kept at 30℃ or less and 70%RH or less.
- The Infrared LED should be used within 168 hours (7 days) after opening the package.
- If the moisture absorbent material (silicone gel) has faded away or the Infrareds have exceeded the storage time, baking treatment should be performed using the following conditions.
- Pre-curing treatment: 60±5℃ for 24 hours.
- Thermal Management
- Because the Infrared LED is a high power dissipation device, special and sufficient consideration in thermal management design must be made to optimize the thermal performance.
- Heat sink design is implemented in the device for an additional thermal connection. Since the device is capable of SMT process, tin must be spread both heat sink and solder pads areas to dissipate the heat.
- A high thermal conductivity substrate, such as Aluminum or Copper plate etc, must be applied for external thermal management. It is strongly recommended that the outer heat sink or PCB dimension per Infrared LED can not be less than 25 x 25 x 1 (L x W x H) mm. The materials for outer heat sink can be FR4 on Aluminum, MCPCB, or FPC on Aluminum.
- Special thermal designs are also recommended to take in outer heat sink design, such as FR4 PCB on Aluminum with thermal vias or FPC on Aluminum with thermal conductive adhesive, etc.
- Sufficient thermal management must be conducted, or the die junction temperature will be over the limit under large electronic driving and Infrared LED lifetime will decrease critically.
- Soldering Condition
- Reflow soldering should not be done more than two times.
- While soldering, do not put stress on the Infrareds during heating.
- After soldering, do not warp the circuit board.
- Soldering Iron
- For prototype builds or small series production runs it is possible to place and solder the LED by hand.
- Dispensing thermal conductive glue or grease on the substrates and follow its curing spec. Press Infrared housing to closely connect Infrared and substrate.
- It is recommended to hand solder the leads with a solder tip temperature of 280°C for less than 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal.
- Be careful because the damage of the product is often started at the time of the hand solder.
- Handling Indications
- During processing, mechanical stress on the surface should be minimized as much as possible.
- Sharp objects of all types should not be used to pierce the sealing compound.
For other parameters and pictures, please see the attachment PDF files,thank you.
For more details, please contact us.
Email:Facebook@doublelight.com.cn
-
Product Details:
Place of Origin: China
Brand Name: Doule Light
Certification: RoHS/ REACH
Model Number: DL-PCB3535W
Payment & Shipping Terms:
Minimum Order Quantity: 100pcs/Real
Price: US$0.13-0.3 Per piece or Price Negotiable
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
