0603 SMD 3.0-3.6V White High Brightness Smd Led 350-550mcd 0.60mm Height
Product Details:
Place of Origin: China(mainland)
Brand Name: DOUBLE LIGHT
Certification: ROHS / REACH
Model Number: DL-PCBE0603W80-1W120
Payment & Shipping Terms:
Minimum Order Quantity: 4000pcs
Price: US$ 0.011-0.020per unit (Pieces)
Packaging Details: Dimensions per Unit:0.28 × 0.2 × 0.13 Meters
• Weight per Unit:3.5 Kilograms
• Units per Export Carton:40000
• Export Carton Dimensions L/W/H: 0.45 × 0.28 × 0.27 Meters
• Export Carton Weight:14.2 Kilograms
Delivery Time: 5-7 working days after received your payment
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 15,000,000pcs per Day
- Product Description
- parameter
-
Product Name:
0603 SMD Chip Led White
Package:
0603 White
Model Number:
DL-PCBE0603W80-1W120
VF:
3.0-3.6V
Luminous Flux(lm):
350-550Mcd
Size:
1.6mm*0.8mm*0.6mm
Loaded Quantity /Reel:
4000pcs
Emitting Color:
White:3000-6500K
Power:
0.06W
Storage Temperature(℃）:
-40℃ To +80℃
Highlight:
led smd rgb, brightest smd led
0603 3.0-3.6V White High Brightness Smd Led 350-750mcd 0.60mm Height
This is 3.0-3.6V SMD Led 0603 , 0.40mm Height 0603 Package White Chip LED
Features:
- Package in 8mm tape on 7″ diameter reel.
- Compatible with automatic placement equipment.
- Compatible with infrared and vapor phase reflow solder process.
- Mono-color type.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The PCB0603 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
- Besides, lightweight makes them ideal for miniature applications, etc.
Applications:
- Automotive: Backlighting in dashboard and switch.
- Telecommunication: Indicator and backlighting in telephone and fax.
- Flat backlight for LCD, switch and symbol.
- General use.
Package Dimension:
Part No. Chip Material Lens Color Source Color DL-PCB0603W80-1W120 InGaN Yellow Diffused White Notes:
- All dimensions are in millimeters (inches).
- Tolerance is ± 0.10mm (.004″) unless otherwise specified.
- Specifications are subject to change without notice.
Absolute Maximum Ratings at Ta=25℃
Parameters Symbol Max. Unit Power Dissipation PD 95 mW Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
IFP 100 mA Forward Current IF 25 mA Reverse Voltage VR 5 V Electrostatic Discharge (HBM) ESD 1000 V Operating Temperature Range Topr -40℃ to +80℃ Storage Temperature Range Tstg -40℃ to +85℃ Soldering Temperature Tsld 260℃ for 5 Seconds Electrical Optical Characteristics at Ta=25℃
Parameters Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity * IV 350 550 --- mcd IF=20mA (Note 1) Viewing Angle * 2θ1/2 --- 130 --- Deg IF=20mA (Note 2) Chromaticity Coordinates x --- 0.30 --- IF=20mA (Note 3) y --- 0.31 --- Forward Voltage VF 3.0 3.3 --- V IF=20mA Reverse Current IR --- --- 10 µA VR=5V Notes:
- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- It use many parameters that correspond to the CIE 1931 2°. X, Y, and Z are CIE 1931 2° values of Red, Green and Blue content of the measurement.
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Chromaticity Coordinates Specifications for Bin Rank
(IF=20mA, Ta=25℃)
Color Group Chromaticity Coordinate Group White Full X 0.270 0.270 0.350 0.350 Y 0.240 0.290 0.380 0.330 A X 0.270 0.270 0.297 0.297 Y 0.240 0.257 0.287 0.270 B X 0.297 0.297 0.323 0.323 Y 0.270 0.287 0.317 0.300 C X 0.323 0.323 0.350 0.350 Y 0.300 0.317 0.347 0.330 D X 0.270 0.270 0.297 0.297 Y 0.257 0.273 0.303 0.287 E X 0.297 0.297 0.323 0.323 Y 0.287 0.303 0.333 0.317 F X 0.323 0.323 0.350 0.350 Y 0.317 0.333 0.363 0.347 G X 0.270 0.270 0.297 0.297 Y 0.273 0.290 0.320 0.303 H X 0.297 0.297 0.323 0.323 Y 0.303 0.320 0.350 0.333 I X 0.323 0.323 0.350 0.350 Y 0.333 0.350 0.380 0.363 Notes:
- Color coordinates measurement allowance is ± 0.01.
- One delivery will include up to two consecutive color ranks and three luminous intensity ranks of the products the quantity-ratio of the ranks is decided by DOUBLE LIGHT
Reliability Test Items and Conditions:
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%.
LTPD: 10%.
1) Test Items and Results:
No. Test Item Test Hours/Cycles Test Conditions Sample Size Ac/Re 1 Resistance to Soldering Heat 6 Min Tsld=260±5℃,
Min. 5sec
25pcs 0/1 2 Thermal Shock 300 Cycles H: +100℃ 5min ∫ 10 sec
L: -10℃ 5min
25pcs 0/1 3 Temperature Cycle 300 Cycles H: +100℃ 15min ∫ 5min
L: -40℃ 15min
25pcs 0/1 4 High Temperature Storage 1000Hrs. Temp: 100℃ 25pcs 0/1 5 DC Operating Life 1000Hrs. IF=20mA 25pcs 0/1 6 Low Temperature Storage 1000Hrs. Temp: -40℃ 25pcs 0/1 7 High Temperature/ High Humidity 1000Hrs. 85℃/85%RH 25pcs 0/1 2) Criteria for Judging the Damage:
Item Symbol Test Conditions Criteria for Judgment Min Max Forward Voltage VF IF=20mA --- F.V.*)×1.1 Reverse Current IR VR=5V --- F.V.*)×2.0 Luminous Intensity IV IF=20mA F.V.*)×0.7 --- *) F.V.: First Value.
Reel Dimensions:
Carrier Tape Dimensions:
Loaded quantity 4000PCS per reel.
Please read the following notes before using the product:
1. Over-current-proofCustomer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture adsorbent material (silica gel) has fabled away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
5. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
6. Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded.
-
Product Details:
Place of Origin: China(mainland)
Brand Name: DOUBLE LIGHT
Certification: ROHS / REACH
Model Number: DL-PCBE0603W80-1W120Payment & Shipping Terms:
Minimum Order Quantity: 4000pcs
Price: US$ 0.011-0.020per unit (Pieces)
Packaging Details: Dimensions per Unit:0.28 × 0.2 × 0.13 Meters
• Weight per Unit:3.5 Kilograms
• Units per Export Carton:40000
• Export Carton Dimensions L/W/H: 0.45 × 0.28 × 0.27 Meters
• Export Carton Weight:14.2 Kilograms
Delivery Time: 5-7 working days after received your payment
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 15,000,000pcs per Day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
