IR Lamp Infrared Emitting Diode LED 3mm Cylindrical Flange Lamp For Camera Chip
Product Details:
Place of Origin: China (mainland)
Brand Name: Double Light
Certification: ISO9001:2008/ROHS
Model Number: DL-304IRCX-1IR80
Payment & Shipping Terms:
Minimum Order Quantity: 1000pcs/pack
Packaging Details: Dimensions per Unit:0.28 × 0.2 × 0.13 Meters
• Weight per Unit:3.5 Kilograms
• Units per Export Carton:40000
• Export Carton Dimensions L/W/H: 0.45 × 0.28 × 0.27 Meters
• Export Carton Weight:14.2 Kilograms
Delivery Time: 10-15 working days after received your payment
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 15,000,000pcs per Day
- Product Description
- parameter
-
Product Name:
3mm Cylindrical With Flange Lamp LED
Package:
Standard T-1 3/4 Diameter Package
Emitted Color:
Infrared
Product Number:
DL-304IRCX-1IR80
Lens Type:
Water Clear
Forward Voltage @20ma:
0.8-1.8V
Viewing Angle:
80Deg
Forward Current:
100mA
Peak Emission Wavelength:
940nm
Spectral Bandwidth:
50nm
Highlight:
ir emitting diode, 940nm infrared led
3mm Cylindrical With Flange lamp LED Infrared Emitting Diode
Know more details,please contact with me to get specifications.
Part No. Chip Material Lens Color Source Color DL-304IRCX-1IR80 GaAlAs
Water Clear Infrared
Notes:
- All dimensions are in millimeters (inches).
- Tolerance is ± 0.25 mm (.010″) unless otherwise noted.
- Protruded resin under flange is 1.00 mm (.04″) max
- Specifications are subject to change without notice.
Package Dimension:
Features:
- Standard T-1 3/4 diameter package.
- Low forward voltage.
- Viewing angle=80°.
- Reliable and rugged.
- The product itself will remain within RoHS complaint Version.
Descriptions:
- The device is spectrally matched with silicon photodiode and phototransistor.
Applications:
- Floppy disk drive.
- Optoelectronic switch.
- Camera.
- Free air transmission system.
- Video.
Electrical Optical Characteristics at Ta=25℃
Parameters Symbol Min. Typ. Max. Unit Test Condition Radiant Intensity
IV 18.0 24.0 --- mW/sr
IF=20mA Ee
--- 42.0 --- IF=100mA, tp=100µs, tp/T=0.01
Viewing Angle 2θ1/2 --- 80
--- Deg IF=20mA (Note 2) Peak Emission Wavelength
λp
--- 940 --- nm IF=20mA Spectral Bandwidth
Δλ
--- 50 --- nm IF=20mA Forward Voltage VF 0.80 1.20 1.50 V IF=20mA VF --- 1.60 1.80 V IF=100mA, tp=100µs, tp/T=0.01
Reverse Current IR --- --- 10 µA VR=5V Notes:
- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- Typical Electrical / Optical Characteristics Curves(25℃ Ambient Temperature Unless Otherwise Noted)
Soldering:
. Manual of Soldering
1.The temperature of the iron tip should not be higher than 300℃ (572℉) and Soldering within 3 seconds per solder-land is to be observed.
2. Reflow Soldering
Preheating: 140℃~160℃±5℃, within 2 minutes.
Operation heating: 235℃ (Max.) within 10 seconds (Max)
Gradual Cooling (Avoid quenching).
3. DIP soldering (Wave Soldering):
Preheating: 120℃~150℃, within 120~180 sec.
Operation heating: 245℃±5℃ within 5 sec.260℃ (Max)
Gradual Cooling (Avoid quenching).
Handling :
Care must be taken not to cause to the epoxy resin portion of LEDs while it is exposed to high temperature.
Care must be taken not rub the epoxy resin portion of LEDs with hard or sharp article such as the sand blast and the metal hook.Notes for designing:
Care must be taken to provide the current limiting resistor in the circuit so as to drive the LEDs within the rated figures. Also, caution should be taken not to overload LEDs with instantaneous voltage at the turning ON and OFF of the circuit.
When using the pulse drive care must be taken to keep the average current within the rated figures. Also, the circuit should be designed so as be subjected to reverse voltage when turning off the LEDs.Storage:
In order to avoid the absorption of moisture, it is recommended to solder LEDs as soon as possible after unpacking the sealed envelope.
If the envelope is still packed, to store it in the environment as following:
1.Temperature : 5℃-30℃ (41℉), Humidity : RH 60﹪Max.
2.After this bag is opened, devices that will be applied to infrared reflow, vapor-phase reflow, or equivalent soldering process must be:
a)Completed within 24 hours.
b)Stored at less than 30% RH.
3.Devices require baking before mounting, if (2) a or (2) b is not met.
4.If baking is required, devices must be baked under below conditions: 12 hours at 60℃±3℃.Package and Label of Products:
Products are packed in one bag of 500pcs (one taping reel) and a label is attached on each bag. -
Product Details:
Place of Origin: China (mainland)
Brand Name: Double Light
Certification: ISO9001:2008/ROHS
Model Number: DL-304IRCX-1IR80
Payment & Shipping Terms:
Minimum Order Quantity: 1000pcs/pack
Packaging Details: Dimensions per Unit:0.28 × 0.2 × 0.13 Meters
• Weight per Unit:3.5 Kilograms
• Units per Export Carton:40000
• Export Carton Dimensions L/W/H: 0.45 × 0.28 × 0.27 Meters
• Export Carton Weight:14.2 Kilograms
Delivery Time: 10-15 working days after received your payment
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 15,000,000pcs per Day
Product inquiry
Have a question about purchasing a product or solution that you are interested in? Fill in the form and we’ll respond in 7 working days.
HOT PRODUCTS
1608 LED White Light Indicator
3mm Round Standard T-1 25mA 30Deg 592nm Led Light Chip
5mm 632nm 180mW 30mA led light chip T-1 3/4 Type With Flange
5mm Cylindrical Lens 50Deg 100mA 25mW Light Emitting Diode
F3 3MM Type Ultra Amber 20mA 605nm 60mW LED Led Light Components
Square Shape 5Ф Dome 4 Lead Ultra Red LED Light Chip 100mA Peak Forward Current
700-1200nm Silicon Chip Infrared Receiver Module For AV Equipment
3014 Height 0.06W led chip / led light chip 80-CRI 85-CRI and 90-CRI
20 Years of LED Component Manufacturing Factory
